Please wait...

The product was added to the shopping cart.View shopping cart here

Please wait...

Kampagner
Finn
blekk/tónara
Finn
Kingston-RAM
Finn
peru til sjónvørpu
Kaðalkonfiguratorur
Forsíðan / Tilhoyr /

Køling

ARCTIC COOLING P12 PWM Case Fan, 120mm, black/ black (ACFAN00119A)

ARCTIC COOLING P12 PWM Case Fan, 120mm, black/ black (ACFAN00119A)


VØRUNUMMAR: ACFAN00119A
Type / Purpose: Computer case
212,00 kr.
Nøgd: 
 
Keyp
(169,60 kr. mvg. ikki íroknað)
Á goymsluÁ fjargoymslu.: 1
Lýsing

P12 PWM


Pressure-optimised 120 mm Fan with PWM

Optimised for Static Pressure During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM is particularly suitable for use on heatsinks and radiators.

Strong Cooling Performance Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans.
In internal performance tests leveled to 28 dB (A), the new P-fans left many competitors behind.

More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 to 1800 RPM
regulated via PWM Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM.
In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.


Specifications:

Fan:
  • 120 mm, 200 - 1.800 RPM (Controlled by PWM)
Air Flow:
  • 56.3 CFM / 95.65 m³/h (@ 1.800 RPM)
Noise Level:
  • 0.3 Sone (@ 1.800 RPM)
Static Pressure:
  • 2.2 mm H2O (@ 1.800 RPM)
Typical Voltage:
  • + 12 V DC
Start-up Voltage:
  • 3.9 V
Cable Length:
  • 400 mm
Motherboard:
  • + 12 V DC, PWM control signal, 4-pin socket

Hóast vit gera okkara ítasta til tess at veita nøktandi kunning, so eru myndirnar bert vegleiðandi, og vøran sjálv er ikki endiliga 100% eins vorðin sum vísta myndin. Tól og annað kunnu verða víst við eykaútgerð, sum ikki hoyrir uppí, ella í øðrum skapi ella liti. Um so er, at munur er millum vørulýsingina og myndina, er tað vørulýsingin, ið geldur. Eru tygum í iva, setið tygum so í samband við okkum. Vit taka fyrivarni fyri prentvillum, prísbroytingum og vørulýsingum uttan fyrivarning.